NANOSUN™ SKYTUBE Tabular Daylight

Light That Runs
The Length of
Your Building

The SKYTUBE is not a single dome. It's a long rectangular light strip that sits on your roof and floods an entire factory bay, warehouse aisle, or large hall with natural daylight — from one end to the other. No electricity. No wires. Just sunlight, spread evenly across the length of your space.

Available in widths from 280mm to 680mm and lengths up to 4500mm — sized to match your exact roof bay.

Factory Bays
Warehouse Aisles
Corridors
Large Halls
NANOSUN SKYTUBE Tabular Daylight System

SKYTUBE

Tabular Daylight

Like a tube light from above — only it runs on sunshine, not electricity.

Patented Tech

Original IP

R&D Certified

KLE Tech University

Made In India

In-house Mfg

How Is SKYTUBE Different From Circular?

This is the question most customers ask first — and it's a good one.

NANOSUN™ Circular
NANOSUN™ SKYTUBE
ShapeRound domeRectangular strip
Light PatternCircular pool of lightLong strip — lights entire bay
Best ForIndividual rooms, specific zonesFactory aisles, warehouse bays, corridors
Profile on RoofDome (raised)Low-profile panel (80–175mm flat)
Roof TypesPEB, RCC, TilePEB / Pitched Roof
How It WorksSingle reflector pipeMultiple reflectors spread along length

In simple terms: If a circular NANOSUN is like a spotlight from above, the SKYTUBE is like a tube light from above — only it runs on sunshine, not electricity.

How It Works

Three stages from rooftop to factory floor — zero electricity at every step.

Roof Panel
01

Step 01Light Collector

Roof Panel

A flat rectangular panel sits on your pitched roof — low profile, barely visible from the outside. It collects natural daylight across its entire length, not just from one point.

Reflectors
02

Step 02Along the Length

Reflectors

Inside the panel, a series of aluminium reflectors (5, 10, or 12 depending on size) are spaced evenly along the length. Each one captures and directs light downward — so the entire strip is lit, not just the centre.

Diffuser
03

Step 03Full-Length at Ceiling

Diffuser

A continuous diffuser panel at ceiling level spreads the light softly and evenly across the floor below — like a long glowing ceiling panel, but powered entirely by the sun.

Zero Electricity During Daytime
UV & Heat Filtered
Low-Profile on Roof
Leak-Proof Flanged Design
Flame Retardant Materials

Product
Families

The SKYTUBE range is organised into three families based on width — each suited to different bay sizes and light requirements. Within each family, you choose the length that matches your roof bay.

280mm Wide

Narrow Series

The slimmest of the SKYTUBE range. Ideal for narrow spaces where you need a continuous strip of natural light but don't have the roof width for a wider unit. Works well in corridors, along machine rows, and in narrow storage aisles.

Best for: Corridors, narrow factory aisles, single-lane bays, machine rows

1080mm × 280mm

Short and narrow — perfect for a small corridor or compact bay section.

Request Pricing
Dimensions (W × L × H)280mm × 1080mm × 100mm (±5%)
ShapeRectangle
Flange Size50mm all around
Suitable Roof HeightBelow 12 Feet
No. of Reflectors5
Reflector Diameter200mm (±5%)
Reflector Height60mm (±5%)
Reflector MaterialAluminium, 95%+ reflective
Diffuser Size600mm × 4460mm
Diffuser MaterialOptical Polycarbonate (diamond embossed)
Lux Output150 – 250 Lux

Full Range
Comparison

ModelWidthLengthRoof HeightReflectorsLuxBest For
Narrow 1080 280mm1080mmBelow 12 ft5150–250Short corridors, small bays
Narrow 1650 280mm1650mmBelow 16 ft5150–250Medium corridors
Narrow 3050 280mm3050mmBelow 20 ft5150–250Long narrow aisles
Medium 1080 450mm1080mmBelow 12 ft10150–250Short factory sections
Medium 3600 450mm3600mmBelow 12 ft5150–250Standard bay lighting
Medium 4000 450mm4000mmBelow 12 ft10150–250Full bay, standard shed
Wide 1080 600mm1080mmBelow 20 ft5150–300Large sections, taller bays
Wide 3050 600mm3050mmBelow 40 ft12300–600High-bay, large industrial
Wide 4000 600mm4000mmBelow 12 ft10150–250Long wide bays
Wide 4500 680mm4500mmBelow 12 ft5150–250Largest bays
Rect. Dome 550mm660mmBelow 12 ft150–250Flat roof, compact
Sq. Dome 900mm900mmUp to 12 ftFlat roof, architectural

Where Is SKYTUBE Used?

Factories & Production Plants

Light runs the full length of each production bay

Warehouses & Logistics

Every aisle is naturally lit, all day

Commercial Buildings

Long corridors, open-plan floors, retail areas

Schools & Institutions

Long corridors, sports halls, canteens

Stations & Public Infrastructure

Long covered platforms and walkways

Any PEB / Pitched Roof

Where bay-length lighting is needed

Key Benefits

Lights entire factory bays, not just spots
Up to 600 Lux output — matches industrial requirements
Zero electricity during the day
Low-profile on roof — sits nearly flat (80–175mm)
Multiple sizes — match any bay width and length
UV and heat filtered — comfortable light, no fading
Flame retardant — FR-rated for industrial safety
Leak-proof flanged design — monsoon-ready
Made in India by Uday IKSA, Hubballi
Engineering Excellence

The Hubballi
Story

When you choose Uday IKSA, you aren't just buying a product — you're investing in 15+ years of patented research and Japanese-tier lean manufacturing. Based in Hubballi, Karnataka, we own the entire engineering lifecycle: from in-house die-making to site installation.

CII Award Winner

Innovation Excellence

In-house Mfg

Zero Compromise

Uday IKSA Industrial Installation

Hubballi Facility

Certified
In-House Production

Quality Controlled Since 2009

Tell Us Your Bay Size.

The right unit depends on your roof bay width, bay length, roof height, and the lux level you need. Our team will calculate the exact placement for even light distribution across your entire floor.